जियोटेक्स्टाइल कम्पोजिट जियोमेम्ब्रेन की सामान्य स्थापना के तरीके
As the key medium of the anti-seepage structure, the geomembrane layer should meet the stress requirements during installation, because the leak control effect of geomembrane is related to its strength and thickness. Therefore, choose the appropriate thickness according to the design stress.
The जियोटेक्सटाइल कम्पोजिट जियोमेम्ब्रेन heated with geotextile on one side or two sides has the features of high overall strength, tear resistance, anti-breaking and anti-piercing ability. The geotextile compounded on the membrane surface has supported and protected abilities.
For the leak control structure utilized with composite geomembrane, in general, the support layer and the protection layer can be simplified. For example, this geotextile composite geomembrane can be directly laid before the placement of concrete facing surface or the protective surface composed of the gravel cushion and the concrete slab. After laying this composite geomembrane, the medium coarse sand cushion can be directly laid.
The phenomenon that geotextile composite geomembrane is punctured is caused by the unenven subgrade, so it is important to prepare and maintain the civil works of subgrade.
General geotextile composite जियोमेम्ब्रेन installation method:
सबसे पहले, सबग्रेड उपचार
Subgrade should be prepared according to the design requirements, which is the key to ensuring the leak control performance. The substances including sharp stones, roots and other foreign subjects should be thoroughly removed, and subgrade is not allowed to be uneven. The prepared and maitained subgrade should be compacted by a tamper or a seesaw.
दूसरा, बिछाने
जियोटेक्स्टाइल कम्पोजिट जियोमेम्ब्रेन बिछाते समय, इसे ऊपर से नीचे तक रखा जाना चाहिए। जियोकंपोजिट के बीच ओवरलैप, और जियोमेम्ब्रेन और सबग्रेड के बीच फ्लैट और तंग होना चाहिए, लेकिन इसे बहुत कसकर नहीं खींचा जाना चाहिए, आम तौर पर यह थोड़ा ढीला होना चाहिए। बुलबुले को नीचे से रोका जाना चाहिए। क्योंकि जियोटेक्स्टाइल कम्पोजिट जियोमेम्ब्रेन अपेक्षाकृत पतला और हल्का होता है, इसलिए सुरक्षात्मक परत बिछाने से पहले हवा से उड़ाया जाना आसान होता है। इसलिए, जियोटेक्स्टाइल कम्पोजिट जियोमेम्ब्रेन को एक समय में एक बड़े क्षेत्र के साथ तैनात नहीं किया जाना चाहिए। जियोकम्पोजिट अच्छी तरह से बिछाने के बाद मिट्टी की सुरक्षात्मक परत बिछाएं।
तीसरा, संयुक्त
The joint has three methods of hot-melt welding, gluing and compacting, wherein the hot-melt welding has the best waterproof effect.
शंघाई यिंगफैन पर्यावरण इंजीनियरिंग कं, लिमिटेड